PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
DESCRIPTION In stop and start control status, there is normal status (Standard) and stop and start priority status (Extended).
Stop and start control status can be switched to the desired mode by operating the steering pad switch assembly, and the mode change is also shown on the multi-information
DESCRIPTION
The ABS solenoid relay and solenoid valves are built into the
brake actuator assembly.
The rear solenoid valve LH controls the brake fluid pressure
of the rear wheel cylinder LH of the vehicle.
When this DTC is stored, the fail-safe function operates and
the ABS solenoid relay i