Toyota Corolla Cross: Revolution Sensor (nt Sensor)
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
NO. 1 ENGINE UNDER COVER ASSEMBLY
INSPECTION
PROCEDURE
1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT)
(a) Connect the battery to the transmission revolution sensor (NT) as shown in
the illustration.
*1
Ba
INSTALLATION
CAUTION / NOTICE / HINT
COMPONENTS (INSTALLATION)
Procedure
Part Name Code
1
TRANSMISSION REVOLUTION SENSO
SEE MORE:
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the resolver output signal is abnormal. The cause of this malfunction may be one of the following:
Area Main Malfunction Description
Inverter low-voltage circuit
The connectors are not connected properly
H
DESCRIPTION Refer to DTC P012011. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P022011 Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Ground
The output voltage of VTA2 is less than 2.05 V for 2 seconds or more (
Removal
Generator Position Sensor Circuit "A" Circuit Open (P0C6413,P0C641F,P0C6913,P0C691F)
