Toyota Corolla Cross: Revolution Sensor (nss Sensor)
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
TCM
89535B
-
INSPECTION
PROCEDURE
1. INSPECT TRANSMISSION REVOLUTION SENSOR (NSS)
(a) Connect the battery to the transmission revolution sensor (NSS) as shown
in the illustration.
*1
INSTALLATION
CAUTION / NOTICE / HINT
COMPONENTS (INSTALLATION)
Procedure
Part Name Code
1
TRANSMISSION REVOLUTION SENSO
SEE MORE:
DESCRIPTION If the engine stop and start ECU receives the off signal from the ignition or starter switch assembly*1 or certification ECU (smart key ECU assembly)*2 when communication with the ECM is normal, the engine stop and start ECU will output DTC P253014.
*1: w/o Smart Key System
*2:
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT: Using the GTS to read the Data List allows the values or states of swit
Removal
Ignition Switch Circuit Short to Ground or Open (P253014)
