Toyota Corolla Cross: Shift Lever
READ NEXT:
ON-VEHICLE INSPECTION
PROCEDURE
1. SECURE VEHICLE
(a) Fully apply the parking brake and chock a wheel.
CAUTION:
Make sure to apply the parking brake and chock a wheel before performing
this
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
SECURE VEHICLE
-
DISASSEMBLY
CAUTION / NOTICE / HINT
COMPONENTS (DISASSEMBLY)
Procedure
Part Name Code
1
SHIFT LEVER HOUSING BRACKET SUB
SEE MORE:
DESCRIPTION
The TCM uses signals from the transmission revolution sensor (NT) installed to
the continuously variable transaxle to control the lock-up engagement pressure.
The transmission revolution sensor (NT) detects the input turbine speed and sends
it to the TCM.
DTC No.
DESCRIPTION Refer to DTC P012011. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P022011 Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Ground
The output voltage of VTA2 is less than 2.05 V for 2 seconds or more (
On-vehicle Inspection
Input/Turbine Speed Sensor "A" Circuit Short to Battery (P071512,P071514,P071531)
