Toyota Corolla Cross: Front Drive Shaft Assembly (for M20a-fks Awd)
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
FRONT WHEELS
-
-
DISASSEMBLY
CAUTION / NOTICE / HINT
COMPONENTS (DISASSEMBLY)
Procedure
Part Name Code
1
FRONT NO. 2 AXLE INBOARD JOINT
INSPECTION
PROCEDURE
1. INSPECT FRONT DRIVE SHAFT ASSEMBLY
(a) Check that there is no excessive play in the radial direction of
the outboard joint.
SEE MORE:
DESCRIPTION HINT: These DTCs relate to the accelerator pedal position sensor.
Refer to DTC P212012. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P212514 Throttle/Pedal Position Sensor/Switch "E" Circuit Short to Ground or Open
DESCRIPTION If the key ID codes of the door control transmitter assembly and transponder key ECU assembly match, the immobiliser system is unset and the engine start permission signal is sent to the ECM. When the ID codes of the transponder key ECU assembly and ECM match, the engine starts. WIRING D
Removal
Throttle/Pedal Position Sensor/Switch "E" Circuit Short to Ground or Open (P212514)
