Toyota Corolla Cross: Front Drive Shaft Assembly (for M20a-fxs)
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
FRONT WHEELS
-
-
DISASSEMBLY
CAUTION / NOTICE / HINT
COMPONENTS (DISASSEMBLY)
Procedure
Part Name Code
1
FRONT NO. 2 AXLE INBOARD JOINT
INSPECTION
PROCEDURE
1. INSPECT FRONT DRIVE SHAFT ASSEMBLY
(a) Check that there is no excessive play in the radial direction of
the outboard joint.
SEE MORE:
DESCRIPTION HINT: These DTCs relate to the accelerator pedal position sensor.
Refer to DTC P212012. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P21382B Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation Signal Cro
REGISTRATION
PROCEDURE
1. REGISTER VEHICLE INFORMATION
NOTICE:
When the radio and display receiver assembly is replaced, perform
the Register Vehicle Information procedure.
(a) Enter the following menus: Body Electrical / Telematics / Utility
/ VIN Synchronization
Body Electrical > Tele
Removal
Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation Signal Cross Coupled (P21382B)
