Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Audio And Visual System

READ NEXT:

 Precaution

PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (a) After the ignition switch is turned off, the radio and display receiver assembly records various types

 Parts Location

PARTS LOCATION ILLUSTRATION *1 TELEPHONE MICROPHONE ASSEMBLY (RH) *2 TELEPHONE MICROPHONE ASSEMBLY (LH) *3 SKID CONTROL ECU

 System Diagram

SYSTEM DIAGRAM

SEE MORE:

 Ultrasonic Sensor (Front Right Center) Component Internal Failure (C1AE396)

DESCRIPTION The front center ultrasonic sensor (FRC sensor) is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front center ultrasonic sensor (FRC sensor). If an open circuit or other malfunction occurs in the front cen

 On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT GTS (a) Connect the GTS to the DLC3 with the engine switch off. (b) Start the engine and run it at idle. (c) Turn the GTS on. (d) Enter the following menus: Chassis / Brake/EPB / Active Test. HINT: Refer to the GTS operator's manual for further

© 2020-2025 Copyright www.tcorollacross.com PT NL