Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Freeze Frame Data

FREEZE FRAME DATA

CHECK FREEZE FRAME DATA (USING GTS)

HINT:

Whenever a DTC is stored, the ECU stores the current vehicle state as freeze frame data.

(a) Select the DTC from "Trouble Codes" screen and display the freeze frame data.

Body Electrical > Navigation System > Trouble Codes

(b) Confirm the output freeze frame data.

LIST OF FREEZE FRAME DATA

Body Electrical > Navigation System

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Distance driven

0 to 16777215

Distance driven

-

Total Distance Traveled - Unit

Unit when distance driven is displayed

km/mile

Distance driven unit is displayed

-

USB Connect Status

USB Connect Status

ON/OFF

OFF: USB not connected

ON: USB connected

-

    READ NEXT:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST (a) In accordance with the screen on the GTS, display the data list screen and check the data. Body Electrical > Navigation System > Data List

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART AUDIO AND VISUAL SYATEM DTC No. Detection Item Link B154711 GNSS Antenna Circuit Short to Ground

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) NOTICE: When checking the vehicle control history (RoB), record any stored history first. Check Vehicle Control History (RoB) (Audio and Visual System) (a) In accor

    SEE MORE:

     Odometer and trip meter display

    ■ Changing the display Press the display change button until the desired item is displayed. ■ Display items Odometer Displays the total distance the vehicle has been driven. Trip meter A/Trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip me

     Drive Mode Select Switch Circuit

    DESCRIPTION When the drive mode select switch (combination switch assembly) is operated, a switch signal is sent to the hybrid vehicle control ECU and the hybrid vehicle control ECU changes the drive mode. WIRING DIAGRAM PROCEDURE 1. READ VALUE USING GTS (CAN BUS CHECK) Cl

    © 2020-2026 Copyright www.tcorollacross.com PT NL