Toyota Corolla Cross: Brake
- Brake (front)
- Brake (rear)
- Brake Control / Dynamic Control Systems
- Brake Actuator (for Gasoline Model)
- Brake Actuator (for Hev Model)
- Brake Control Power Supply
- Brake Hold Switch
- Brake Pedal Stroke Sensor (for Hev Model)
- Electronically Controlled Brake System (for Gasoline Model)
- Electronically Controlled Brake System (for Hev Model)
- Front Speed Sensor
- Rear Speed Sensor (for Awd)
- Steering Angle Sensor
- Vsc Off Switch (for Console Box)
- Vsc Off Switch (for Instrument Panel Side)
- Brake System (other)
- Brake Booster (for Gasoline Model)
- Brake Booster (for Hev Model)
- Brake Fluid (for Gasoline Model)
- Brake Fluid (for Hev Model)
- Brake Line
- Brake Master Cylinder (for Gasoline Model)
- Brake Master Cylinder (for Hev Model)
- Brake Pedal (for Gasoline Model)
- Brake Pedal (for Hev Model)
- Brake System (for Gasoline Model)
- Brake System (for Hev Model)
- Vacuum Pump
- Parking Brake
READ NEXT:
Removal
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
PRECAUTION
-
SEE MORE:
Driver Frontal Stage 2 Deployment Control Circuit Resistance Below Threshold (B00021A)
DESCRIPTION
DTC No. Detection Item
DTC Detection Condition Trouble Area
Warning Indicate Test Mode / Check Mode
B00021A Driver Frontal Stage 2 Deployment Control Circuit Resistance Below Threshold
One of the following conditions is met:
The airbag ECU a
Remote Service Malfunction
PROCEDURE
1.
CHECK CAN COMMUNICATION SYSTEM
(a) Enter the following menus: Bus Check.
for HEV Model:
Click here
for Gasoline Model:
Click here
(b) Check that all ECUs and sensors that use CAN communication
are connected.
Result
© 2020-2025 Copyright www.tcorollacross.com
