Toyota Corolla Cross: Electric Parking Brake Actuator
READ NEXT:
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
(a) With the ignition switch to ON and the wheels not contacting the
ground, operate the electric parking brake switch (
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
PRECAUTION
-
INSPECTION
PROCEDURE
1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY LH
(a) Parking brake actuator assembly LH operation inspection
(1) Apply voltage to the terminals of the parking brake ac
SEE MORE:
DESCRIPTION
The power steering ECU assembly supplies a voltage of 5 V to the torque sensor
(electric power steering column sub-assembly) and monitors the voltage value of
the Hall IC inside the torque sensor (electric power steering column sub-assembly)
which changes in response to changes in
REGISTRATION / INITIALIZATION / LEARNING HIGH VOLTAGE FUSE ACCUMULATED LOAD HISTORY RESET
HINT: If the HV battery junction block assembly has been replaced, make sure to perform "High Voltage Fuse Accumulated Load History Reset" and then clear the DTCs.
DTC P0A9563 will be stored again if do n
On-vehicle Inspection
Power Steering Torque Sensor "A" Signal Compare Failure (C151162,C151187,C151262,C151287)
