Toyota Corolla Cross: Occupant Classification System
READ NEXT:
PRECAUTION GENERAL PRECAUTION (a) The following conditions may be interpreted as a malfunction even though they are normal operation:
An object is placed on the front passenger seat and the syste
PARTS LOCATION ILLUSTRATION
*1 BRAKE ACTUATOR ASSEMBLY
- SKID CONTROL ECU *2
MAP LIGHT ASSEMBLY - PASSENGER AIRBAG ON/OFF INDICATOR ILLUSTRATION
*1 AIRBAG ECU AS
SYSTEM DIAGRAM
Communication Table
Transmitting ECU / Parts (Transmitter)
Receiving ECU (Receiver)
Signal Communication Method
Passenger Seat Buckle Switch (Front Seat Inn
SEE MORE:
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY
(a) Check for looseness.
(1) Lift up the vehicle.
(2) Move the front lower No. 1 suspension arm sub-assembly up and down
by hand with a force of 294 N (30 kgf) or more to check that there is no
loo
INSPECTION
PROCEDURE
1. INSPECT SHIFT STROKE SENSOR
(a) Connect 3 new dry-cell batteries (1.5 V each) in series.
(b) Prepare a magnet or equivalent tool.
(c) Connect a positive (+) lead from the batteries to terminal 2 (VDD) and a
negative (-) lead to terminal 3 (GND).
*a