Toyota Corolla Cross: Dtc Check / Clear
DTC CHECK / CLEAR
DTC CHECK
(a) Check for DTCs (Test Failed / Pending / Confirmed).
Body Electrical > SRS Airbag > Trouble Codes
|
GTS Display | Description |
|
Test Failed | Shows the malfunction judgment results during the current trip. |
|
Pending | Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.) |
|
Confirmed | Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.) |
HINT:
Freeze frame data is stored for each of the latest result DTCs, pending DTCs and confirmed DTCs.
DTC CLEAR
(a) On the DTC check screen, select the clear button to clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
HINT:
DTCs and freeze frame data are cleared at the same time.
READ NEXT:
FREEZE FRAME DATA DESCRIPTION (a) When an occupant classification system DTC is stored, the airbag ECU assembly stores the current vehicle (ECU or sensor) state as Freeze Frame Data.
CHECK FREEZE FR
FAIL-SAFE CHART FAIL-SAFE FUNCTION (a) The following chart shows the status of the front passenger SRS items and passenger airbag ON/OFF indicator operation under failure condition.
Passenger Ai
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a
SEE MORE:
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT REAR WIPER MOTOR ASSEMBLY (a) Operate the rear wiper motor assembly.
(b) Stop the rear wiper motor assembly operation.
(c) Check the automatic stop position. HINT: After the rear wiper motor assembly is stopped, check the automatic stop position afte
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
This DTC is stored when the skid control ECU (brake actuator
assembly) receives a sensor supply voltage malfunction signal from the yaw rate
and acceleration sensor (airbag
