Toyota Corolla Cross: Fail-safe Chart
FAIL-SAFE CHART
FAIL-SAFE FUNCTION
(a) The following chart shows the status of the front passenger SRS items and passenger airbag ON/OFF indicator operation under failure condition.
|
Passenger Airbag ON/OFF Indicator |
Front Passenger SRS Item |
|
ON Indicator | OFF Indicator |
Instrument Panel Passenger without Door Airbag Assembly |
Front Seat Airbag Assembly RH |
Curtain Shield Airbag Assembly RH |
Front Seat Outer Belt Assembly RH |
|
OFF | ON |
X | ○ |
○ | ○ |
- ○: Deployable
- X: Not deployable
READ NEXT:
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a
DIAGNOSTIC TROUBLE CODE CHART Occupant Classification System
DTC No. Detection Item
Warning Indicate Test Mode / Check Mode
Link B00C028
Passenger Seat Occupant Classific
VEHICLE CONTROL HISTORY
NOTICE:
Replacing or repairing related components may cause vehicle control history codes to be stored.
When checking the vehicle control history, make sure to recor
SEE MORE:
InspectionINSPECTION PROCEDURE
1. INSPECT STARTER RELAY ASSEMBLY (ST)
(a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
3 - 5 Battery voltage no
CHECK FOR INTERMITTENT PROBLEMS HINT: Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2
