Toyota Corolla Cross: Lighting (int)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT DOOR INSIDE HANDLE BEZEL PLUG
69284F
- -
2
INSPECTION PROCEDURE 1. INSPECT FRONT DOOR AMBIENT LIGHT LH (FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH)
(a) Check the illumination.
(1) Apply auxiliary battery voltage to the front door ambient li
SEE MORE:
ON-VEHICLE INSPECTION PROCEDURE
1. FUEL PUMP ASSEMBLY OPERATION (a) Check fuel pressure. (1) Connect the GTS to the DLC3.
(2) Turn the power switch on (IG). (3) Turn the GTS on. (4) Put the engine in Inspection Mode (Maintenance Mode). Powertrain > Hybrid Control > Utility
Tester D
DESCRIPTION
This procedure is for troubleshooting when the brake system
warning light (yellow indicator) remains on but no DTCs are output.
The skid control ECU (brake actuator assembly) controls the
brake system warning light (yellow indicator) in the combination meter assembly
via CAN comm
