Toyota Corolla Cross: Rear Door Courtesy Switch
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR SEAT ASSEMBLY
- -
- -
2 REAR DOOR SCUFF PLATE
INSPECTION PROCEDURE 1. INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY LH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resis
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
84234
-
SEE MORE:
DESCRIPTION
The skid control ECU (brake actuator assembly) receives stop
light switch assembly signals and uses them to determine whether or not the brakes
are applied.
When the brake pedal is depressed and no signal is received
from the stop light switch assembly, this DTC is output.
DESCRIPTION The battery ECU assembly monitors the SOC (State Of Charge) of the HV battery. When it finds the HV battery has deteriorated excessively, it will display "Have Traction Battery Inspected" on the multi-information display. If "Have Traction Battery Inspected" is displayed, perform "Batter
Removal
Brake Pressure Sensor "A" / Brake Switch "A" Signal Compare Failure (C117B62)
