Toyota Corolla Cross: Glove Box Light
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT DOOR SCUFF PLATE RH
67913 -
- -
2 COWL SIDE TRIM
INSPECTION PROCEDURE 1. INSPECT GLOVE BOX LIGHT ASSEMBLY
(a) Check the illumination.
(1) Apply auxiliary battery voltage to the glove box light assembly and check that the light illuminates.
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 GLOVE BOX LIGHT ASSEMBLY
81260 -
- -
2 LOWER
SEE MORE:
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or
maintenance, performing initialization, registration or calibration may
be needed. Refer to Precaution for Safety Connect System.
Click here
Inspect the fuses f
PROCEDURE
1.
PERFORM ROAD TEST
(a) After turning the ignition switch to ON, compare the operating
sound of the brake actuator the first time the vehicle speed reaches 45 km/h (28
mph) with a known good vehicle of the same model.
OK:
The operating sound is the
Removal
Emergency Call Switch Illumination Circuit
