Toyota Corolla Cross: Interior Illumination Light (for Instrument Panel)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT DOOR SCUFF PLATE RH
67913 -
- -
2 COWL SIDE TRIM
INSPECTION PROCEDURE 1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
(a) Check the illumination.
(1) Apply auxiliary battery voltage to the No. 1 interior illumination light assembly and
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
81080J -
- -
SEE MORE:
DESCRIPTION
This DTC is stored when the blind spot monitor sensor LH (B)
detects an internal malfunction.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C1AB604
Rear Side Radar Sensor (Module "B") Syst
PRECAUTION PRECAUTIONS WHEN USING GTS (a) When using the GTS with the ignition switch off to troubleshoot:
Connect the GTS to the vehicle, and turn a courtesy light switch on and off at 1.5 seconds intervals until communication between the GTS and vehicle begins.
(b) After all DTCs are cleared,
Removal
Rear Side Radar Sensor (Module "B") System Internal Failure (C1AB604)
