Toyota Corolla Cross: Before driving
READ NEXT:
Driving procedure
■ Driving
1. With the brake pedal
depressed, shift the shift
lever to D.
2. Release the parking brake.
3. Gradually release the brake
pedal and gently depress the
accelerator pe
When the following unusual
operation is performed with the
accelerator pedal depressed,
the engine output may be
restrained.
When the shift lever is shifted
to R*.
When the shift lever is shifted
Take notice of the following
information about storage
precautions, cargo capacity
and load:
Capacity and distribution
Cargo capacity depends on the
total weight of the occupants.
(Cargo capacity) = (
SEE MORE:
DESCRIPTION When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly) operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.
If the hybrid vehicle control ECU receives a sig
ELECTRONIC CIRCUIT INSPECTION PROCEDURE
BASIC INSPECTION
(a) WHEN MEASURING RESISTANCE OF ELECTRONIC PARTS
(1) Unless otherwise stated, all resistance measurements are standard values
measured at an ambient temperature of 20°C (68°F). Resistance measurements may be
inaccurate if measured at
