Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Cargo and luggage

Take notice of the following information about storage precautions, cargo capacity and load:

Capacity and distribution

Cargo capacity depends on the total weight of the occupants.

(Cargo capacity) = (Total load capacity) - (Total weight of occupants)

Steps for Determining Correct Load Limit -

(1) Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard.

(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

(4) The resulting figure equals the available amount of cargo and luggage load capacity.

For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 - 150) = 650 lbs.)

(5) Determine the combined weight of luggage and cargo being loaded on the vehicle.

That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.

(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.

Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.

    READ NEXT:

     Calculation formula for your vehicle

    Cargo capacity Total load capacity (vehicle capacity weight) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity we

     Vehicle load limits

    Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. Total load capacity (vehicle capacity weight) Total load capacity means the combined weight

     Trailer towing

    Your vehicle is designed primarily as a passenger- and-load-carrying vehicle. Towing a trailer can have an adverse impact on handling, performance, braking, durability, and fuel consumption. For your

    SEE MORE:

     Disposal

    DISPOSAL PROCEDURE 1. DISPOSE OF BACK DOOR STAY ASSEMBLY NOTICE: Make sure the piston rods are in the fully extended stake before performing work. (a) Secure the back door stay assembly horizontally in a vise with the piston rod pulled out. (b) Wearing safety glasses, gradually cut a part within

     Camshaft Position "A" - Timing Over-Retarded Bank 1 (P001200)

    DESCRIPTION Refer to DTC P001001. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P001200 Camshaft Position "A" - Timing Over-Retarded Bank 1 With engine warmed up and while driving in urban area (engine speed 4000 rpm or less

    © 2020-2024 Copyright www.tcorollacross.com