Toyota Corolla Cross: Hybrid / Battery Control
Toyota Corolla Cross (2022-2024) Service Manual / Engine & Hybrid System / Hybrid / Battery Control
- Accelerator Pedal Sensor
- Battery Blower
- Battery Ecu
- Combination Switch
- Coolant (for Inverter)
- Frame Wire
- Hv Battery
- Hv Relay Assembly
- Hybrid Battery System
- Hybrid Control System
- Hybrid Vehicle Control Ecu
- Inverter With Converter
- Motor Generator Control System
- Relay
- Service Plug Grip
- Sub Radiator
- Water Pump With Motor
READ NEXT:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY (a) Connect the GTS to the DLC3.
(b) Turn the power switch on (IG). (c) Turn the GTS on. (d) Enter the following menus:
Removal
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55606 -
- -
SEE MORE:
Internal Control Module Accelerator Pedal Position Performance Internal Electronic Failure (P060D49)
MONITOR DESCRIPTION The ECM monitors the input signals of the No. 1 accelerator pedal position sensor. If the input signals and control signals deviate, this DTC is stored.
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P060D49 Internal Control M
On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the cooling fan system.
PROCEDURE
1. INSPECT COOLING FAN MOTOR CAUTION: To prevent injury due to conta
© 2020-2024 Copyright www.tcorollacross.com
