Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Right Front Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12BB12,...,C12C649)

Toyota Corolla Cross (2022-2024) Service Manual / Brake / Brake Control / Dynamic Control Systems / Electronically Controlled Brake System (for Gasoline Model) / Right Front Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12BB12,...,C12C649)

DESCRIPTION

The ABS solenoid relay and solenoid valves are built into the brake actuator assembly.

The front solenoid valve RH controls the brake fluid pressure of the front wheel cylinder RH of the vehicle.

When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the solenoid valves from operating.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C12BB12

Right Front Wheel ABS Hold Solenoid Control Circuit Short to Battery

A short to +B in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12BB14

Right Front Wheel ABS Hold Solenoid Control Circuit Short to Ground or Open

An open or short in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12BB1C

Right Front Wheel ABS Hold Solenoid Control Circuit Voltage Out of Range

  • A current leak in the solenoid circuit is detected during the self test.
  • The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time.

Skid control ECU (brake actuator assembly)

C12BB1E

Right Front Wheel ABS Hold Solenoid Control Circuit Resistance Out of Range

An abnormal resistance in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12BB49

Right Front Wheel ABS Hold Solenoid Control Internal Electronic Failure

An internal malfunction in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12C612

Right Front Wheel ABS Release Solenoid Control Circuit Short to Battery

A short to +B in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12C614

Right Front Wheel ABS Release Solenoid Control Circuit Short to Ground or Open

An open or short in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12C61C

Right Front Wheel ABS Release Solenoid Control Circuit Voltage Out of Range

  • A current leak in the solenoid circuit is detected during the self test.
  • The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time.

Skid control ECU (brake actuator assembly)

C12C61E

Right Front Wheel ABS Release Solenoid Control Circuit Resistance Out of Range

An abnormal resistance in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

C12C649

Right Front Wheel ABS Release Solenoid Control Internal Electronic Failure

An internal malfunction in the solenoid circuit is detected during the self test.

Skid control ECU (brake actuator assembly)

PROCEDURE

1.

REPLACE BRAKE ACTUATOR ASSEMBLY

Click here

NEXT

END

    READ NEXT:

     Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12D112,...,C12DC49)

    DESCRIPTION The ABS solenoid relay and solenoid valves are built into the brake actuator assembly. The rear solenoid valve LH controls the brake fluid pressure of the rear wheel cylinder LH of t

     Right Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12E712,...,C12F249)

    DESCRIPTION The ABS solenoid relay and solenoid valves are built into the brake actuator assembly. The rear solenoid valve RH controls the brake fluid pressure of the rear wheel cylinder RH of t

     Brake System Control Module "A" System Voltage System Voltage High (C137BA3)

    DESCRIPTION If a malfunction is detected in the power supply circuit, the skid control ECU (brake actuator assembly) stores this DTC and the fail-safe function prohibits ABS operation. This DTC

    SEE MORE:

     Removal

    REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 PRECAUTION - - - 2 DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTE

     Installation

    INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION) Procedure Part Name Code 1 EXHAUST CAMSHAFT SUB-ASSEMBLY - - - 2 INTAKE CAMSHAFT SUB-ASSEMBLY - - - 3 CAMSHAFT BEARING CAP -

    © 2020-2024 Copyright www.tcorollacross.com