Toyota Corolla Cross: Other interior features
READ NEXT:
The USB charging port are used
to supply 3.0 A of electricity at 5
V to external devices.
The USB charging port are for
charging only. They are not
designed for data transfer or
other purposes.
Depe
The power outlet can be used
for 12 V accessories that run on
less than 10 A.
Lift the lid while pulling up the
knob and open the power outlet
lid.
■The power outlet can be used
when
The engine sw
A portable device, such as a
smartphone or mobile battery,
can be charged by just placing it
on the charging area, provided
the device is compatible with the Qi wireless charging standard
created by t
SEE MORE:
DESCRIPTION
When TRAC or VSC is operating, the skid control ECU (brake actuator
assembly) blinks the slip indicator light to inform the driver that slippage occurred.
When a communication malfunction with the ECM is detected, TRAC
and VSC are disabled. Also, TRAC and VSC are disabled when a DT
ON-VEHICLE INSPECTION PROCEDURE
1. FUEL PUMP ASSEMBLY OPERATION (a) Check fuel pressure. (1) Connect the GTS to the DLC3.
(2) Start the engine. (3) Turn the GTS on. (4) Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset / Fuel Pressure (High).
USB charging port
VSC does not Operate or VSC does not Operate Correctly
