Toyota Corolla Cross: Sun visors
.png)
- To set the visor in the forward
position, flip it down.
- To set the visor in the side
position, flip down, unhook,
and swing it to the side.
- To use the side extender,
place the visor in the side
position, then slide it backward.
(if equipped)
Vanity mirrors
Slide the cover to open.
The vanity light turns on. (if
equipped)
.png)
■To prevent battery discharge
(vehicles with vanity lights)
If the vanity lights remain on when
the engine switch is OFF, the lights
will go off automatically after 20 minutes.
NOTICE
■To prevent the battery from
being discharged (vehicles
with vanity lights)
Do not leave the vanity lights on
for extended periods while the
engine is stopped.
READ NEXT:
Fold down the armrest for use.
NOTICE
■To prevent damage to the
armrest
Do not apply too much load on the
armrest.
Assist grips
An assist grip installed on the
ceiling can be used to support
your b
The garage door opener can
be programmed using the
HomeLink to operate
garage doors, gates, entry
doors, door locks, home
lighting systems, security
systems, and other devices.
System components
The H
This section offers drivers thorough direction and guidelines to guarantee the longevity, dependability, and peak performance of their car. This part equips owners with the knowledge and skills necess
SEE MORE:
DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU detects that a safety device (interlock) is operated or that there is an open circuit in the detection circuit. (Even if an open circuit occurs while the vehicle is stopped, the system determines that the safety device was operated.)
DESCRIPTION
The rear corner ultrasonic sensor (RL sensor) is installed on
the rear bumper. The clearance warning ECU assembly detects obstacles based on signals
it receives from the rear corner ultrasonic sensor (RL sensor). If an open circuit
or other malfunction occurs in the rear corner ul
