Toyota Corolla Cross: Opening, closing and locking the doors
READ NEXT:
■ Smart key system (if
equipped)
Carry the electronic key to
enable this function.
Grip the driver's door handle to unlock the door. Holding the driver's door handle for approximately 2 seconds u
■ Door lock switches (to
lock/unlock)
Locks all the doors
Unlocks all the doors
■ Inside lock buttons
Locks the door
Unlocks the door
The front doors can be opened by
pulling the inside
The door cannot be opened
from inside the vehicle when
lock is set.
Unlock
Lock
These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock
SEE MORE:
DESCRIPTION These DTCs are stored when the engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN communication do not match.
DTC No. Detection Item
DTC Detection Condition Trouble Area
Note P033562
Crankshaft Position Sensor "A" Si
FAIL-SAFE CHART
DESCRIPTION
The fail-safe function minimizes the loss of Continuously Variable Transaxle
(CVT) system functions when a sensor or solenoid valve malfunctions.
FAIL-SAFE
HINT:
If any of the following DTCs are stored, the TCM enters fail-safe mode to allow
the vehicle to be dri