Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Adjusting the open position of the back door (vehicles with a power back door)

Toyota Corolla Cross (2022-2025) Owner's Manual / Before driving / Opening, closing and locking the doors / Adjusting the open position of the back door (vehicles with a power back door)

The open position of the power back door can be adjusted.

1. Stop the power back door at the desired position.

2. Press and hold the power back door switch on the back door for approximately 2 seconds.

  • When setting is complete, a buzzer will sound 4 times.
  • The next time the power back door is opened, it will stop at that position.

Opening, closing and locking the doors

■Returning the power back door opening position to the default setting

Press and hold the power back door switch on the back door for approximately 7 seconds.

A buzzer will sound 4 times, pause, and then sound 2 more times. The next time the power back door is opened, it will stop at the default position.

Opening, closing and locking the doors

■When setting the open position of the back door by the multi-information display

The open position of the power back door can be adjusted using the multi-information display.

When opened, the power back door will open to the last position set using the power back door switch on the back door or on the multi-information display.

    READ NEXT:

     Smart key system

    The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. Locks and unlocks the

     Adjusting the seats

     Front seats

    Adjustment procedure Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver's side only) Power seat (driver's side only) Seat p

    SEE MORE:

     Drive Motor "B" Inverter Actuator Stuck Open (P0A7972)

    DTC SUMMARY MALFUNCTION DESCRIPTION This DTC is stored when the rear motor control system is malfunctioning and current does not flow as commanded. The cause of this malfunction may be one of the following: Internal inverter malfunction Inverter with converter assembly internal circuit malfun

     Removal

    REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 FRONT WHEEL LH - - - - 2 FRONT BUMPER ASSEMBLY - - - - 3 FRONT FENDER MOULDING SUB-ASSEMBLY LH 75602A - - - 4 FRONT FE

    © 2020-2025 Copyright www.tcorollacross.com PT NL