Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Enabling/disabling the power back door system (vehicles with a power back door)

Toyota Corolla Cross (2022-2025) Owner's Manual / Before driving / Opening, closing and locking the doors / Enabling/disabling the power back door system (vehicles with a power back door)

The power back door system can be enabled/disabled on the multi-information display.

1. Select or of the multi-information display and then press .

4.2-inch display meter

2. Press or of meter control switches, select the "Vehicle Settings" and then press and hold .

3. Press or of the meter control switches, select "PBD" and then press .

4. Press or of the meter control switches, and then select "System Settings".

5. ON and OFF will be switched when is pressed.

7.0-inch display meter

2. Press or of meter control switches, select the "Vehicle Settings" and then press and hold .

3. Press or of the meter control switches, select "PBD" and then press .

4. Press or of the meter control switches, and then select "System Settings".

5. ON and OFF will be switched when is pressed.

When OFF is selected and the operations of the power back door is made to stop from the or of multi-information display, unless it is set to ON, the operation of the power back door will not return. (No return in the engine switch operation)

    READ NEXT:

     Adjusting the open position of the back door (vehicles with a power back door)

    The open position of the power back door can be adjusted. 1. Stop the power back door at the desired position. 2. Press and hold the power back door switch on the back door for approximately 2 second

     Smart key system

    The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. Locks and unlocks the

     Adjusting the seats

    SEE MORE:

     Installation

    INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION) Procedure Part Name Code 1 SET INVERTER WITH CONVERTER ASSEMBLY G92A0 - - 2 MOTOR CABLE G1148 - - 3 UPPER INVERTER COV

     Initialization

    INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch. (b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility Tester Display Servomotor Initialization HINT: When initialization is started, the AUTO switc

    © 2020-2025 Copyright www.tcorollacross.com PT NL