Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Odometer and trip meter display

■ Changing the display

Press the display change button until the desired item is displayed.

Vehicle status information and indicators

■ Display items

  • Odometer

Displays the total distance the vehicle has been driven.

  • Trip meter A/Trip meter B

Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.

To reset, display the desired trip meter and press and hold the display change button.

Changing the instrument panel light brightness

The brightness of the instrument panel lights can be adjusted.

Vehicle status information and indicators

  1. Brighter
  2. Darker

■Instrument panel light brightness adjustment

The brightness of the instrument panel lights can be adjusted separately for when the tail lights are on and off.

Adjusting the clock

■ The clocks can be adjusted on the audio system screen.

Refer to "MULTIMEDIA OWNER'S MANUAL".

    READ NEXT:

     Gauges and meters (7-inch display)

     Meter display

    ■ Locations of gauges and meters The units of measure may differ depending on the intended destination of the vehicle. Engine coolant temperature gauge Displays the engine coolant temperature O

     Odometer and trip meter display

    ■ Changing the display Press the display change button until the desired item is displayed. ■ Display items Odometer Displays the total distance the vehicle has been driven. Trip meter A/Tri

    SEE MORE:

     Fuel Rail Pressure Sensor (Low) Signal Stuck in Range (P107A2A,P107A64)

    DESCRIPTION Refer to DTC P107A11. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P107A2A Fuel Rail Pressure Sensor (Low) Signal Stuck in Range When the target fuel pressure for the low pressure side changes, the change in the

     Brake Pressure Control Solenoid "A" Control Circuit Short to Battery (C13C012,...,C13C949)

    DESCRIPTION The ABS solenoid relay and master cylinder cut solenoid valves are built into the brake actuator assembly. Depending on the operating conditions, the master cylinder cut solenoid valves regulate the brake fluid pressure generated by the pump motor. When this DTC is stored, the fai

    © 2020-2026 Copyright www.tcorollacross.com PT NL