Toyota Corolla Cross: Gauges and meters (4.2-inch display)
READ NEXT:
■ Locations of gauges and meters
The units of measure may differ depending on the intended destination of
the vehicle.
Tachometer
Displays the engine speed in revolutions per minute
Outside tem
■ Changing the display
Press the display change button
until the desired item is displayed.
■ Display items
Odometer
Displays the total distance the vehicle
has been driven.
Trip meter A/Tri
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT KNOCK CONTROL SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
1 - 2 25°C (77°F)
120 to 280 kΩ If the result is not as
INSPECTION PROCEDURE 1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) Check the operation.
(1) Connect a positive (+) lead from the auxiliary battery to connector terminal L2-2 (B).
NOTICE: Do not connect a positive (+) lead from the auxiliary battery to any terminal other than termin
Meter display
Inspection
