Toyota Corolla Cross: Wiper Switch
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 STEERING WHEEL POSITION
-
- -
2 LOWER STEERING COLUMN COVE
INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: Front
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 WINDSHIELD WIPER SWITCH ASSEMBLY
84650 -
- -
2 UPPER S
SEE MORE:
TERMINALS OF ECU
NOTICE:
DTCs may be output when connectors are disconnected during inspection.
Therefore, be sure to clear the DTCs using the GTS once the inspection has
been completed.
Do not apply excessive force to the millimeter wave radar sensor assembly
connector.
CHEC
INSPECTION PROCEDURE 1. INSPECT CYLINDER HEAD SUB-ASSEMBLY
(a) Using a precision straightedge and feeler gauge, measure the warpage of the contact surfaces where the cylinder head sub-assembly contacts the cylinder block sub-assembly, intake manifold and exhaust manifold.
*a Bottom Si
Removal
Terminals Of Ecu
