Toyota Corolla Cross: Outer Mirror Switch
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL
INSPECTION PROCEDURE 1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
(a) Check the mirror select and surface adjust switch. (1) Turn the mirror select and surface adjust switch to the L position.
(2) Me
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 OUTER MIRROR SWITCH ASSEMBLY
84870A -
- -
2 MULTIPLEX
SEE MORE:
DIAGNOSIS SYSTEM
OBD II (except Mexico Models)
When troubleshooting OBD II (On-Board Diagnostics) vehicles, the GTS (complying
with SAE J1978) must be connected to the DLC3 (Data Link Connector 3) of the vehicle.
Various data in the vehicle's TCM (Transmission Control Module) can be then
INSPECTION
PROCEDURE
1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using a dial indicator, measure the runout of the intermediate shaft
assembly.
Maximum Runout:
0.6 mm (0.0236 in.)
NOTICE:
The dial indicator must be set at a right angle to the center of
Removal
Diagnosis System
