Toyota Corolla Cross: Mirror (ext)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL
INSPECTION PROCEDURE 1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
(a) Check the mirror select and surface adjust switch. (1) Turn the mirror select and surface adjust switch to the L position.
(2) Me
SEE MORE:
DESCRIPTION
This DTC is stored when the skid control ECU (brake actuator
assembly) receives a +B line open signal from the steering sensor.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C14FE14
Steering Angle S
DESCRIPTION The ECM and engine stop and start ECU send and receive signals via CAN communication.
If a communication error occurs between the ECM and engine stop and start ECU, the ECM stores this DTC.
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
Removal
Steering Angle Sensor Supply Voltage Circuit Circuit Short to Ground or Open
(C14FE14)
