Toyota Corolla Cross: Key Reminder Warning System
READ NEXT:
PRECAUTION PRECAUTION WHEN REPLACING COMBINATION METER ASSEMBLY
(a) When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was install
PARTS LOCATION ILLUSTRATION
*1 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (LH)
*2 COMBINATION METER ASSEMBLY
*3 UN-LOCK WARNING SWITCH ASSEMBLY
*4 MAIN BODY ECU (M
SEE MORE:
DESCRIPTION The motor generator control ECU (MG ECU), which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction.
DTC No. Detection Item
DTC Detection Condition
Trouble Area MIL
Warning Indica
ON-VEHICLE INSPECTION
PROCEDURE
1. CONNECT GTS
(a) Connect the GTS to the DLC3 with the engine switch off.
(b) Start the engine and run it at idle.
(c) Turn the GTS on.
(d) Enter the following menus: Chassis / Brake/EPB / Active Test.
HINT:
Refer to the GTS operator's manual for further
