Toyota Corolla Cross: System Description
SYSTEM DESCRIPTION
KEY REMINDER WARNING SYSTEM DESCRIPTION
(a) When the driver door is opened with the ignition switch off or ACC, this system causes a buzzer to sound in order to warn the driver that the key has not been removed.
READ NEXT:
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the key reminder warning system.
*: Use the GTS.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
OPERATION CHECK CHECK FUNCTION (a) Check that the key reminder warning buzzer sounds.
(1) With the driver door closed, insert the key into the ignition key cylinder and then make sure that the ignit
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order
SEE MORE:
ADJUSTMENT
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after completing the rear wheel alignment procedure are shown
below.
Necessary Procedures After Procedure Performed
Replaced Part or Perfor
DESCRIPTION
This DTC is stored when the destination information of the main
body ECU (multiplex network body ECU) does not match that of the blind spot monitor
sensors.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
U032
