Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Precaution

PRECAUTION

PRECAUTION WHEN REPLACING COMBINATION METER ASSEMBLY

(a) When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

    READ NEXT:

     Parts Location

    PARTS LOCATION ILLUSTRATION *1 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (LH) *2 COMBINATION METER ASSEMBLY *3 UN-LOCK WARNING SWITCH ASSEMBLY *4 MAIN BODY ECU (M

     System Diagram

    SYSTEM DIAGRAM

     System Description

    SYSTEM DESCRIPTION KEY REMINDER WARNING SYSTEM DESCRIPTION (a) When the driver door is opened with the ignition switch off or ACC, this system causes a buzzer to sound in order to warn the driver th

    SEE MORE:

     Control Module Performance Bank 1 Watchdog/Safety MCU Failure (P060747)

    DESCRIPTION The TCM continuously monitors its monitor IC. If it detects an internal malfunction, the TCM illuminates the MIL and stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory No

     XM Tuner Antenna Circuit Short to Ground (B15FE11,B15FE13)

    DESCRIPTION These DTCs are stored when a malfunction occurs in the XM antenna which is connected to the radio and display receiver assembly. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority

    © 2020-2026 Copyright www.tcorollacross.com PT NL