Toyota Corolla Cross: Camshaft Oil Control Valve
READ NEXT:
ON-VEHICLE INSPECTION PROCEDURE
1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY Click here
2. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
15370 -
- -
2
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 CAMSHAFT TIMING VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEM
SEE MORE:
CALIBRATION
ADJUST PARKING ASSIST MONITOR SYSTEM
(a) The parking assist monitor system can be adjusted using diagnostic
mode.
(b) If the following operations are performed, it is necessary
to perform adjustments and checks using diagnostic mode.
Part Name
Operation
DESCRIPTION Refer to DTC P019511. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P019515 Engine Oil Temperature Sensor Circuit Short to Battery or Open
The engine oil temperature sensor output voltage is higher than 4.865 V f
On-vehicle Inspection
Calibration
