Toyota Corolla Cross: ABS Pump Motor Control Internal Electronic Failure (C052C49)

Toyota Corolla Cross (2022-2025) Service Manual / Brake / Brake Control / Dynamic Control Systems / Electronically Controlled Brake System (for Gasoline Model) / ABS Pump Motor Control Internal Electronic Failure (C052C49)

DESCRIPTION

The ABS motor relay and pump motor are built into the brake actuator assembly.

If the skid control ECU (brake actuator assembly) detects a malfunction in the drive circuit of the pump motor, this DTC is stored.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C052C49	ABS Pump Motor Control Internal Electronic Failure	The skid control ECU (brake actuator assembly) detects a malfunction in the pump motor circuit. When the system has started, a short to +B is detected during the ABS motor drive circuit self test.	Skid control ECU (brake actuator assembly)

PROCEDURE

1.	REPLACE BRAKE ACTUATOR ASSEMBLY

Click here

END

SEE MORE:

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Dynamic Torque Control AWD System DTC No. Detection Item Link C120C Linear Solenoid Power Supply System Malfunction C1241 Low or High Power Supply Voltage

Toyota Corolla Cross: ABS Pump Motor Control Internal Electronic Failure (C052C49)

READ NEXT:

Brake Pressure Sensor "A" Circuit Voltage Out of Range (C05401C,...,C054096)

Left Front Wheel Speed Sensor Incorrect Component Installed (C055595)

Right Front Wheel Speed Sensor Incorrect Component Installed (C055695)

SEE MORE:

Problem Symptoms Table

Diagnostic Trouble Code Chart