Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Utility

UTILITY

Recognition Camera/Target Position Memory

HINT:

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.

(a) Perform Recognition Camera/Target Position Memory according to the display on the GTS.

Chassis > Front Recognition Camera > Utility

Tester Display

Recognition Camera/Target Position Memory

HINT:

For forward recognition camera adjustment procedures.

Click here

HINT:

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.

Recognition Camera Axis Adjust

(a) Perform Recognition Camera Axis Adjust according to the display on the GTS.

Chassis > Front Recognition Camera > Utility

Tester Display

Recognition Camera Axis Adjust

HINT:

For forward recognition camera adjustment procedures.

Click here

HINT:

Perform this procedure to save the beam axis alignment values stored in the millimeter wave radar sensor assembly to the forward recognition camera.

Camera Axis Adjustment Value Write

(a) Camera Axis Adjustment Value Write according to the display on the GTS.

Chassis > Front Recognition Camera > Utility

Tester Display

Camera Axis Adjustment Value Write

PCS Image Information Clear

HINT:

PCS Image Information Clear is used to clear the PCS Image Information data.

(a) Perform PCS Image Information Clear according to the display on the GTS.

Chassis > Front Recognition Camera > Utility

Tester Display

PCS Image Information Clear

PCS Image Record Setting

HINT:

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.

(a) Perform PCS Image Record Setting according to the display on the GTS.

Chassis > Front Recognition Camera > Utility

Tester Display

PCS Image Record Setting

Initial Axis Adjust Value Display

HINT:

This utility is used to display the initial axis adjust value display stored in the forward recognition camera.

(a) Following the instructions on the GTS, perform "Initial Axis Adjust Value Display".

Chassis > Front Recognition Camera > Utility

Tester Display

Initial Axis Adjust Value Display

Front Recognition Camera Axis Misalignment Reading

HINT:

This utility is used to check the front recognition camera axis misalignment reading calculated by the forward recognition camera.

(a) Following the instructions on the GTS, perform "Front Recognition Camera Axis Misalignment Reading".

Chassis > Front Recognition Camera > Utility

Tester Display

Front Recognition Camera Axis Misalignment Reading

HINT:

This utility transitions to online axis alignment mode of the forward recognition camera.

Transition to Online Axis Alignment Mode

(a) Following the instructions on the GTS, perform "Transition to Online Axis Alignment Mode".

Chassis > Front Recognition Camera > Utility

Tester Display

Transition to Online Axis Alignment Mode

Navigation Installation Information Initialization

HINT:

This utility is used to initialize the navigation installation information stored in the front recognition camera.

(a) Following the instructions on the GTS, perform "Navigation Installation Information Initialization".

Chassis > Front Recognition Camera > Utility

Tester Display

Navigation Installation Information Initialization

    READ NEXT:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: If no DTC is output when a diagnosis code check is performed for the front camera system and the CAN communication system, perform diagnosis according to the

     Terminals Of Ecu

    TERMINALS OF ECU NOTICE: DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

     Freeze Frame Data

    FREEZE FRAME DATA DESCRIPTION (a) When a front camera system DTC is stored, the forward recognition camera stores the current vehicle (ECU or sensor) state as Freeze Frame Data. CHECK FREEZE FRAM

    SEE MORE:

     Blower Motor does not Operate

    DESCRIPTION If air does not flow from the front registers after the blower switch on the air conditioning control assembly is operated, the following factors may be the cause. Symptom Factor Blower motor does not operate at all (Air does not blow from registers)

     Camshaft Position "A" Actuator Bank 1 General Electrical Failure (P001001)

    DESCRIPTION The VVT-iE system adjusts the intake valve timing using a motor. Compared to conventional hydraulic VVT systems, the valve timing can be adjusted within a wider range and can be retarded more when starting the engine. As the VVT-iE system can operate at low engine speeds and when the eng

    © 2020-2024 Copyright www.tcorollacross.com