Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
CAUTION / NOTICE / HINT HINT: *: Use the GTS. PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
2.
CUSTOMER PROBLEM ANALYSIS
NEXT
CHECK FOR INTERMITTENT PROBLEMS HINT: Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 tri
CAUTION / NOTICE / HINT When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out for all circuits considered to be possible causes of the problem. In many cases, by
SEE MORE:
DESCRIPTION The SRS warning light is located in the combination meter assembly.
When the SRS is normal, the SRS warning light comes on for approximately 6 seconds after the ignition switch is turned from off to ON, and then turns off automatically.
If there is a malfunction in the SRS, the SRS w
DESCRIPTION The HV battery is composed of 60 cells (3.7 V each) in series. The battery ECU assembly monitors the internal resistance of each HV battery cell to detect malfunctions of the HV battery.
DTC No. Detection Item
DTC Detection Condition
Trouble Area MIL
Warning
How To Proceed With Troubleshooting
SRS Warning Light does not Come ON
