Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the parking support brake
system.
*: Use the GTS.
PROCEDURE
1.
VEHICLE BROUGHT TO WORK
OPERATION CHECK
PKSB OFF INDICATOR LIGHT OPERATION CHECK
(a) Turn the ignition switch to ON.
(b) Turn the parking support brake system off and confirm that
the PKSB OFF indicator light in the com
CUSTOMIZE PARAMETERS
CUSTOMIZE PARKING SUPPORT BRAKE SYSTEM
(a) Customizing with the GTS.
Clearance Warning
Tester Display
Description
Default
Setting
SEE MORE:
INSPECTION
PROCEDURE
1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using a dial indicator, measure the runout of the intermediate shaft
assembly.
Maximum Runout:
0.6 mm (0.0236 in.)
NOTICE:
The dial indicator must be set at a right angle to the center of
DESCRIPTION
Refer to DTC P281F12.
Click here
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
MIL
Memory
Note
P281F14
Pressure Control Solenoid "J" Circuit Short to Grou
How To Proceed With Troubleshooting
Inspection
