Toyota Corolla Cross: Starter
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT
Procedure Part Name Code
1 PRECAUTION
-
- -
2 NEGATIVE AUXILIARY BATTERY TERMINAL
- -
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY)
Procedure Part Name Code
1 HARNESS
- -
- -
2 WIRE HARNESS
- -
INSPECTION PROCEDURE 1. INSPECT STARTER ASSEMBLY
CAUTION: As a large electric current passes through the cable during this inspection, a thick cable must be used. If not, the cable may become hot an
SEE MORE:
DESCRIPTION
The ABS solenoid relay and master cylinder cut solenoid valves
are built into the brake actuator assembly.
Depending on the operating conditions, the master cylinder cut
solenoid valves regulate the brake fluid pressure generated by the pump motor.
When this DTC is stored, the fai
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE
1. INSPECT WINDSHIELD WIPER RELAY (a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
3 - 5 Auxilia
Removal
Brake Pressure Control Solenoid "A" Control Circuit Short to Battery (C13C012,...,C13C949)
