Toyota Corolla Cross: Side Turn Signal Light Assembly
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 OUTER MIRROR COVER
87945 -
- -
2 OUTER MIRROR BEZEL
- -
INSPECTION PROCEDURE 1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
(a) Check that the side turn signal light assembly LH.
(1) Apply auxiliary battery voltage to the side turn signal light assemb
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 SIDE TURN SIGNAL LIGHT ASSEMBLY
81740 -
- -
2 OUTER MI
SEE MORE:
DESCRIPTION
The ABS solenoid relay and master cylinder cut solenoid valves
are built into the brake actuator assembly.
Depending on the operating conditions, the master cylinder cut
solenoid valves regulate the brake fluid pressure generated by the pump motor.
When this DTC is stored, the fai
DESCRIPTION
The 4WD ECU assembly receives signals from the steering sensor, and thereby detects
the steering angle of the steering wheel assembly to determine when the vehicle
is turning.
When an abnormal signal is received from the steering sensor, the 4WD ECU assembly
stores DTC C1297.
Removal
Brake Pressure Control Solenoid "A" Control Circuit Short to Battery (C13C012,...,C13C949)
