Toyota Corolla Cross: M20a-fxs (emission Control)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 TAIL EXHAUST PIPE ASSEMBLY
17430
- -
2 MAIN MUFF
INSPECTION PROCEDURE 1. INSPECT CANISTER (CHARCOAL CANISTER ASSEMBLY)
(a) Visually check the canister (charcoal canister assembly).
(1) Visually check the canister (charcoal canister assembly
SEE MORE:
DESCRIPTION HINT: These DTCs relate to the accelerator pedal position sensor.
Refer to DTC P212012. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P212514 Throttle/Pedal Position Sensor/Switch "E" Circuit Short to Ground or Open
INSTALLATION PROCEDURE 1. INSTALL PIPING CLAMP (for Suction Hose Sub-assembly)
(a) for Gasoline Model: (1) Remove the vinyl tape from the suction pipe sub-assembly and suction hose sub-assembly.
(2) Install a new piping clamp to the suction hose sub-assembly.
NOTICE:
Securely engage
