Toyota Corolla Cross: Height Control Sensor
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
89408C
- -
2 RE
INSPECTION PROCEDURE 1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for 2WD)
(a) Preparation for check. (1) Confirm the standard, high and low positions of the link that will be used in the f
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
89408C
- -
SEE MORE:
DESCRIPTION The immobiliser function compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
When using
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE
(a) Using a precision straightedge and feeler gauge, check the surface which contacts the cylinder head gasket for warpage.
Maximum Warpage: 0.05 mm (0.00197 in.) HINT: If the warpage is more than the maximum, replace the cylinder
Removal
Immobiliser System does not Operate Properly
