Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Fail-safe Chart

FAIL-SAFE CHART

FAIL-SAFE FUNCTION

(a) If a malfunction is detected in the front radar sensor system, a message is displayed on the multi-information display and systems related to the malfunction are stopped.

    READ NEXT:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when decidi

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Front Radar Sensor System DTC No. Detection Item DTC Output from Link C1A1100 Front Radar Sensor

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) NOTICE: Vehicle control history may be recorded due to the replacement or repair of related parts. When checking the Vehicle Control History, make sure to rec

    SEE MORE:

     On-vehicle Inspection

    ON-VEHICLE INSPECTION PROCEDURE 1. FUEL PUMP ASSEMBLY OPERATION (a) Check fuel pressure. (1) Connect the GTS to the DLC3. (2) Start the engine. (3) Turn the GTS on. (4) Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset / Fuel Pressure (High).

     Engine Immobiliser System Signal (Some Circuit Quantity, Reported via Serial Data) Invalid (B279986)

    DESCRIPTION If there is a communication malfunction between the hybrid vehicle control ECU and ID code box (immobiliser code ECU), or when the communication ID codes do not match, the hybrid vehicle control ECU stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Ar

    © 2020-2026 Copyright www.tcorollacross.com PT NL