Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Washer Nozzle (for Front Side)

READ NEXT:

 On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (a) Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield. Standard: Wa

 Removal

REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 WASHER NOZZLE SUB-ASSEMBLY 85035 - - ● Non-reusable par

 Adjustment

ADJUSTMENT PROCEDURE 1. REMOVE WASHER NOZZLE SUB-ASSEMBLY Click here 2. ADJUST WASHER NOZZLE SUB-ASSEMBLY (a) Select a washer nozzle sub-assembly so that the position the washer fluid hits the win

SEE MORE:

 Engine Immobiliser System Circuit Short to Battery (B279A12)

DESCRIPTION If the communication line (EFIO-IMI) to the transponder key ECU assembly is stuck high (e.g. shorted to +B), the ECM stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B279A12 Engine Immobiliser System Circuit Short to Battery

 Inspection

INSPECTION PROCEDURE 1. INSPECT OUTER MIRROR LH (a) Check the operation of the mirror heater. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 25°C 3.57 to 4.83

© 2020-2026 Copyright www.tcorollacross.com PT NL