Toyota Corolla Cross: VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (CLEARANCE WARNING)
HINT:
Part of the control history can be confirmed using the vehicle control
history.
Click here
VEHICLE CONTROL HISTORY (AIRBAG)
HINT:
Part of the control history can be confirmed using the vehicle control
history.
Click here
READ NEXT:
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication
system connected to the clearance warning ECU assembly.
HINT:
If CAN communication system DTCs are stored, the
DESCRIPTION
This DTC is output when the clearance warning ECU assembly detects
lost communication with the blind spot monitor sensor.
DTC No.
Detection Item
DTC De
SEE MORE:
If the engine will not start
even though correct starting
procedures are being followed, consider
each of the following
points:
The engine will not start
even though the starter
motor operates normally.
One of the following may be the
cause of the problem:
There may not be sufficient
fuel in the
DESCRIPTION The crankshaft position sensor system consists of a crankshaft position sensor plate and Magneto Resistance Element (MRE) type sensor. The crankshaft position sensor plate has 34 teeth at 10° intervals (2 teeth are missing for detecting top dead center), and is installed on the cranksha