Toyota Corolla Cross: Tire / Wheel
READ NEXT:
PROCEDURE
1.
CHECK TIRE AND WHEEL SYSTEM
DIAGNOSIS OF IRREGULAR TIRE WEAR
GO TO STEP 11
DIAGNOSIS OF TIRE VIBRATIO
INSPECTION
PROCEDURE
1. INSPECT TIRES
(a) Inspect the tires for wear and proper inflation pressure.
Cold Tire Inflation Pressure:
Tire Size
Cold Tire Inflation Pressure
SEE MORE:
DESCRIPTION
The brake pedal load sensing switch (brake pedal support assembly)
turns on when the brake pedal is depressed with a force exceeding a predetermined
level.
The skid control ECU (brake actuator assembly) uses this circuit
to detect if the brake pedal is depressed or not.
PRECAUTION PRECAUTIONS WHEN USING GTS (a) When using the GTS with the ignition switch off to troubleshoot:
Connect the GTS to the vehicle, and turn a courtesy light switch on and off at 1.5 seconds intervals until communication between the GTS and vehicle begins.
(b) After all DTCs are cleared,
How To Proceed With Troubleshooting
Brake Pedal Switch "A" Circuit Open (C004013)
