Toyota Corolla Cross: Tire Repair Seal
Disposal
DISPOSAL
PROCEDURE
1. DISPOSE OF TIRE REPAIR SEAL
HINT:
Confirm the expiration date on the side of the repair seal bottle.
(a) Dispose of the retrieved seal by consigning disposal to a waste disposal
firm.
NOTICE:
- The valve and valve core cannot be reused.
- Do not reuse items such as cloths that were used to wipe off seal or gloves
soiled with the seal. Dispose of such items as burnable waste.
(b) Dispose of the empty repair seal bottle as plastic waste.
Recovery
RECOVERY
PROCEDURE
1. RECOVERY OF TIRE REPAIR SEAL
NOTICE:
- Try not to spill the tire repair seal in the tire while performing service.
- Wipe off any spilt seal with a cloth or equivalent.
(a) Using a tire changer, remove the tire from the wheel by following the same
procedure as for a regular tire change.
NOTICE:
Do not raise the tire rapidly as the seal may spill out.
(b) Retrieve the tire repair seal from the removed tire.
HINT:
Using a cloth or equivalent, wipe off any seal spilt on the tire, wheel, tire
changer or floor.
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
ROOF SIDE INNER GARNISH ASSEMBLY LH
SEE MORE:
DESCRIPTION Refer to DTC P033511. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P03352A Crankshaft Position Sensor "A" Signal Stuck in Range
No crankshaft position sensor signal to the ECM while the engine is running (1 trip
DESCRIPTION The SMRs (System Main Relays) are the relays that connect or disconnect the high-voltage system in accordance with commands from the hybrid vehicle control ECU.
There are 2 SMRs. SMRB and SMRG are located in the HV battery junction block assembly.
To shut off the high voltage power