Toyota Corolla Cross: Tire And Wheel System
READ NEXT:
PROCEDURE
1.
CHECK TIRE AND WHEEL SYSTEM
DIAGNOSIS OF IRREGULAR TIRE WEAR
GO TO STEP 11
DIAGNOSIS OF TIRE VIBRATIO
INSPECTION
PROCEDURE
1. INSPECT TIRES
(a) Inspect the tires for wear and proper inflation pressure.
Cold Tire Inflation Pressure:
Tire Size
Cold Tire Inflation Pressure
Disposal
DISPOSAL
PROCEDURE
1. DISPOSE OF TIRE REPAIR SEAL
HINT:
Confirm the expiration date on the side of the repair seal bottle.
(a) Dispose of the retrieved seal by consigning disposal to
SEE MORE:
DESCRIPTION The motor generator control ECU, which is built into the inverter with converter assembly, monitors its internal operation and detects malfunctions.
DTC No. Detection Item
DTC Detection Condition
Trouble Area MIL
Warning Indicate Note
P1C661F Dri
DESCRIPTION The mass air flow meter sub-assembly is a sensor that measures the intake air volume using the following built-in components:
By-pass duct (allows some of the intake air to flow past a silicon chip sensor)
Silicon chip sensor (uses a heater control bridge circuit and temperatur
How To Proceed With Troubleshooting
Drive Motor "B" Control Module Circuit Intermittent (P1C661F,P1CAE49,P1CB138)
