Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the my settings system.
*: Use the GTS.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
REGISTRATION PROCEDURE 1. ASSIGNING SETTINGS
NOTICE: Make sure to complete driver registration before assigning settings.
Procedure Steps
1. Assigning settings (electrical key transm
CUSTOMIZE PARAMETERS INSTALL CUSTOMIZE MY SETTINGS SYSTEM
HINT: The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that the funct
SEE MORE:
■ Checking the oil type and
preparing the item needed
Make sure to check the oil type
and prepare the items needed
before adding oil.
Engine oil selection
Oil quantity (Low → Full)
1.6 qt. (1.5 L, 1.3 Imp. qt.)
Item
Clean funnel
■ Adding engine oil
If the oil level is below or near
the
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) receives signals
from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication.
These DTCs may be store
How To Proceed With Troubleshooting
Adding engine oil
